Accessories for osmosis systems
27 Products
Here you will find all accessories for the osmosis system. In reverse osmosis, all undesirable, dissolved substances in the water are removed using purely mechanical means. The water is filtered through a semi-permeable membrane. The resulting osmotic effect produces highly pure drinking water (permeate). The filtered substances are not collected here, but are released into the wastewater, which means the environment is not polluted. Reverse osmosis systems have become established worldwide and have proven themselves millions of times over. This process is even used to desalinate seawater on a large scale. Very few natural sources have the purity of the water produced by reverse osmosis.
You may also be interested in
für den PrivatgebrauchReverse osmosis systems for industry and commerce
Plug & Play complete systems with softening
Latest Reviews
Do you have questions?
+497251936760 Kontaktformular Request a quoteProduct: REOS HOME under-counter reverse osmosis system
Answer: Precisely because the system is very compact, changing the filter is relatively uncomplicated. You turn off the water and can then place the entire system on the sink or take it outside. Only the water that is in the hoses comes out.
Product: LOWARA small pressure booster system BGM 9/A
Answer: The pump can be used for this without any problems. We would be happy to advise you on this, including regarding storage tanks etc.
Product: ZIP reverse osmosis system
Answer: The question is not easy to answer, generally the ratio is 50/50. Since you don't have to empty the water (it collects back in the container) but only fill it up with new water, you can continue to process the other 50%. Only after the 10th run should you refill the basic tank.
Product: REOS Plug & Play reverse osmosis system with softening system
Answer: Basically, you can connect the system as it is delivered to the water, wastewater and electricity and produce water directly. We also offer various accessories such as storage tanks if necessary. That depends on your requirements. We would be happy to create an individual offer.
Product: REOS Plug & Play reverse osmosis system with softening system
Answer: This depends on the respective model. Here are a few calculations (under optimal conditions): The model with an output of 150 l / h needs almost 7 hours for 1 m³ of water with a power consumption of 0.5 kW. This corresponds to approximately 3.6 kWh per m³. The model with 300 l / h output therefore needs approx. 3.5 h for 1 m³ of water with a power consumption of 0.65 kW. This corresponds to approximately 2.16 kWh per m³. The model with 600 l / h output, on the other hand, needs less than 2 hours for 1 m³ of water with a power consumption of 2.2 kW. This corresponds to approximately 3.6 kW per m³.