Vorfilter-Sets (3 Products)
3 Products
Vorfilter-Set BIG für REOS-PRO Anlagen ab RO-45
Vorfilter-Set 10" für REOS-PRO Anlagen RO-04
Vorfilter-Set 20" für REOS-PRO Anlagen für RO-08 und RO-15
Latest Reviews
Do you have questions?
0725 1936760contact form
Request a quote
Product: ZIP countertop reverse osmosis system / water filter system
Product: ZIP countertop reverse osmosis system / water filter system
Product: REOS HOME under-counter reverse osmosis system
Here you have to distinguish between two operating modes:
- Standby mode : The tank is full and no water is being drawn off. In this case, the system does not make any noise.
- Treatment mode : Water has been drawn off or the tank is being initially filled. In this case, the pump starts to increase efficiency. When the pump is running, the noise level of the system is less than 40 decibels (assuming it is in a closed cabinet), which is about the volume of a quiet conversation or quiet background noise in a library. This makes it ideal for use in kitchens, offices or practices where peace and quiet and a disturbance-free environment are important. The pump switches off immediately when the tank has been refilled (within a few minutes).
Product: REOS HOME under-counter reverse osmosis system
The REOS HOME system is primarily designed for the filtration of tap water. Here are the details of the different types of water that can be filtered:
Tap water: The system is ideal for filtering municipal tap water. It effectively removes contaminants such as chlorine, heavy metals, uranium, calcium, sodium, nitrate, medical residues and microorganisms up to 99%.
Well water: The system can also filter well water, provided it meets the basic requirements for raw water for reverse osmosis systems. Well water can contain varying amounts of sediment and contaminants, so it is important to test the water quality before installation. A coarser pre-filter and in some cases an iron filter may be necessary before the system.
Rainwater: With appropriate pre-filtration, the system can also filter rainwater. However, it is recommended that the water is first pre-treated using sediment and carbon filters to remove larger particles and organic contaminants. Please note, however, that with rainwater, the filter replacement intervals can vary greatly (depending on the level of contamination).
Spring water: The system can also be used to filter spring water if the water is first tested for gross impurities and pretreated if necessary.
For all of the water types mentioned, it is important to ensure that the water quality meets the requirements of the reverse osmosis system to ensure optimal performance and service life of the filters. If there is any uncertainty about the water quality, a water analysis should be carried out and additional pre-filters installed if necessary.