What accessories do I need for an Alfiltra Penta filter system?

For our Penta filter system, we recommend our Basic connection set as an accessory. The connection block is installed in the existing water pipe and the filter system is connected with the flexible reinforced hoses. The connection set also contains the required wastewater hose and a water hardness test set so that the water quality can be measured after the filter system.

The connection set is available with different hose lengths:

• Connection set with 75 cm hoses
• Connection set with 100 cm hoses
• Connection set with 150 cm hoses
• Connection set with 200 cm hoses (on request)

You also need salt to operate the Penta filter system. You can find the salt in our shop at: https://www.alfiltra.de/5-sacke-spezialsalz-regeneriersalz-fur-wasserentharter.html

We also recommend using the Penta filter set . This consists of additional filter stages that remove sand and dirt particles from the water so that your filter system can be protected and the water quality can be further improved.