How is the RESIN CLEAN used/dosed?

Jan 31, 2024, 14:51:48

RESIN Clean is a type of cleaning agent for exchanger resins. It is added to the brine shaft of the softening system during every maintenance and then cleans the resin during the next regeneration.

Dosage: 100 ml per 10 liters of exchanger resin

How much exchanger resin is in your water treatment system can be found on the nameplate of the system or in the table below.

FILTRASOFT model	Amount of exchanger resin	Quantity RESIN Clean
BASIC 20	5 litres	50ml
BASIC 40	10 litres	100ml
BASIC 60	15 litres	150ml
DUPLEX 20	2x 5 l	2x 50 ml*
DUPLEX 40	2x 10 l	2x 100 ml*
DUPLEX 60	2x 15 l	2x 150 ml*
DUPLEX 80	2x 20 l	2x 200 ml*
DUPLEX 120	2x 30 l	2x 300 ml*
DUPLEX 180	2x 45 l	2x 450 ml*

Where is the RESIN Clean filled?

Please fill the RESIN Clean into the gray brine shaft (in the separate salt container for DUPLEX systems) and then trigger manual regeneration. To do this, press and hold the “REGEN” button for 5 seconds. Depending on the type of system, regeneration takes around an hour.

* For DUPLEX systems, you must carry out the above process twice (at least 6 hours apart)

resin-clean-einfülen.jpg