Verbrauchsmaterial für Enthärtungsanlagen
5 Products
To operate your Alfiltra softening system, in addition to our Filtrasoft special salt, you will occasionally need consumables such as cleaners or chlorine tablets. The latter in particular are very important for the maintenance and care of your system, as they clean the exchange resin and thus extend the life of your softening system.
We are also happy to offer you a complete set including maintenance of your device and five salt bags.
Treat your softening system sustainably and you will see that you will enjoy it for a long time to come.
You may also be interested in
Connecting partsAbwasseranschluss-Zubehör für Enthärtungsanlagen
Dosing systems
Montage & Wartung für Enthärtungsanlagen
Latest Reviews
Latest Questions
Product: BASIC softening plant
Answer: This is a complex topic that is controversially discussed on the Internet. The first thing that should be mentioned is that these days mainly plastic pipes are used and no corrosion is to be expected. When water is softened using ion exchange, no CO2 is released and the pH value of the water is not changed. This would look different if the water was treated using reverse osmosis, for example. It is known that copper pipes are subject to a certain degree of corrosion regardless of the quality of drinking water. However, this corrosion is usually so low that copper is considered a durable material. The low corrosion rate of copper in drinking water results from the formation of a coating on the surface of the material consisting of various copper compounds. This layer is reinforced by small amounts of embedded lime, which increases its anti-corrosion effect. In softened water, this limescale deposit is missing, which can reduce the protective function of the top layer. Nevertheless, the protective effect is sufficiently strong to generally prevent corrosion damage over human generations. In summary, there is no absolute freedom from corrosion in copper pipes in drinking water systems. Although water softening has an influence on the protective top layer in the pipes, it only has a negligible impact on their service life. If you had problems with corrosion before installing a softening system, then you should think about installing a dosing system or replacing the pipes.
Product: DUPLEX softening plant
Answer: The DUPLEX softening system is designed so that the wastewater resulting from regeneration is drained away efficiently, even without the use of an additional pump. Thanks to the plant's advanced design and efficient use of existing water pressure, it is able to pump wastewater to a height of up to 2.5 meters. This capability allows for flexible installation of the system as the wastewater hose can be connected directly to a higher wastewater pipe without the need for additional pumping devices. This represents a significant advantage by expanding installation options while keeping operating costs low as no additional energy is required for a wastewater pump. However, please use an open system such as a funnel for the wastewater connection (the hose must be attached to prevent it from slipping out).
Product: DUPLEX softening plant
Answer: There are a few requirements that must be met so that the resin is not damaged (for example the correct pH value). For this reason, the systems are generally only suitable for drinking water. However, the exact values are important and there are options to adjust the values beforehand if desired. In such cases, we would be happy to make you an individual offer.
Product: DUPLEX softening plant
Answer: Yes, we would be happy to offer you a suitable maintenance contract.
Product: BASIC softening plant
Answer: No, the water does not taste salty after softening. Your water does not come into direct contact with the salt. This is used exclusively to regenerate/clean the system.