Enthärtungsanlagen fürs Ein- und Mehrfamilienhaus (3 Products)
3 Products
BASIC Enthärtungsanlage im Sorglospaket
Nominal flow (max. flow): bis 2,7 m³/h
Number of columns: 1 (Basic)
control valve: Clack WS 1
Wasserbedarf tägl. ca.: bis 1.000 Liter
wählbare Kapazitäten: 20 bis 60 m³ x °dH
Einsäulige Wasserenthärtungsanlage für kleine Haushalte und Einfamilienhäuser, verschiedene Kapazitäten für jeden Verbrauch und jede Wasserhärte, elektronisches Steuerventil CLACK WS1 (jetzt NEU), extrem sparsam, wartungsarm - INKLUSIVE Montageservice + 1 x 25 kg Salz + Anschlussteile
DUPLEX Enthärtungsanlage im Sorglospaket
Nominal flow (max. flow): bis 3,1 m³/h
Number of columns: 2 (Pendel)
control valve: Clack WS 1 TT
Wasserbedarf tägl. ca.: bis 2.000 Liter
wählbare Kapazitäten: 20 bis 120 m³ x °dH
Zweisäulige Wasserenthärtungsanlage für Ein- und Mehrfamilienhäuser, verschiedene Kapazitäten für jeden Verbrauch und jede Wasserhärte, elektronisches Steuerventil CLACK WS1 (jetzt NEU), extrem sparsam, wartungsarm, nahezu nicht erschöpfbar durch zweiten Tank - Komplett-Set inkl. Montage-Service, Anschluss-Set und 5x 25 kg Enthärtersalz
LEYCOsoft 9/15 Enthärtungsanlage Sorglospaket
- DVGW-Zertifizierte-Wasserenthärtungsanlage für Einfamilienhäuser bis zu 8 Personen
- zwei Kapazitäten für 2 bis 4 bzw 4 bis 8 Personen je nach Wasserhärte und Verbrauch
- hochwertiges, elektronisches Steuerventil mit optionaler App-Überwachung
- patentierte Ventiltechnologie für hohe Zuverlässigkeit
- INKLUSIVE Montageservice + 1x 25 kg Salz + Anschlussteile
Requirements for private use
Our systems meet all legal requirements for installation in single- and multi-family homes. The requirements vary depending on the size of the house and water consumption.
Individual systems (basic) for single-family homes
The individual systems, also known as the “Basic” model, have a softening column that is filled with special exchanger resin. This resin removes limescale from drinking water without affecting water quality. The capacity of the exchanger resin is limited and depends on your water consumption and the water hardness to be removed. If the capacity is exhausted, the system must be regenerated with salt, similar to a dishwasher. During the regeneration phase, only hard water is available.
Double systems (duplex) for apartment buildings or single-family homes with high water consumption
Our double systems are more expensive to purchase than the basic single systems. The reason for this is that they have two softening columns. This allows for more efficient operation and a continuous supply of soft water. This is particularly useful in apartment buildings where water consumption fluctuates. But a duplex system can also be advantageous in single-family homes with high water consumption, for example due to a pool or frequent bathing.
You may also be interested in
Enthärtungsanlagen fürs EinfamilienhausEnthärtungsanlagen fürs Mehrfamilienhaus
Enthärtungsanlagen für Bauherren
Enthärtungsanlagen für Industrie und Gewerbe
Accessories for softening systems
Configurator
Water softening system test
Latest Reviews
Do you have questions?
0725 1936760contact form
Request a quote
Product: BASIC water softening system
The resin cartridges in your Basic 40 softening system generally do not need to be replaced because they regenerate themselves. The regeneration of the resin is an automated process that takes place during the cleaning cycles of the system. Here are some details:
Regeneration process: During regeneration, the resin is flushed with a salt solution, which dissolves and removes the accumulated calcium and magnesium ions (which are responsible for water hardness) from the resin. This “renews” the resin and can be used effectively to soften water again.
Regular cleaning: This regeneration is carried out regularly, depending on the amount of water used and the hardness of the water. In a 4-person household with a water hardness of 20° dH, the system will regenerate more frequently to ensure efficiency.
No replacement necessary: As long as the system is properly maintained and the regenerating salt is topped up regularly, the resin cartridges do not need to be replaced. However, you should regularly inspect and maintain the system to ensure its longevity and optimal performance.
In summary, the resin cartridges in your Basic 40 system are maintained effectively by the built-in regeneration process and therefore do not require regular replacement.
Product: BASIC water softening system
It is best to let the salt empty until the water is visible.
Then refill and ideally not full to the brim so that there is not too much weight on the salt.
If you keep filling the container without waiting until you see the water at the bottom, clumps can occur.
Product: BASIC water softening system
According to the DIN standard, maintenance should be carried out by a specialist at least every 12 months to ensure optimal function and safety of the system.
However, our water softening systems are designed to be so reliable that many customers carry out regular checks themselves. As long as the system is working properly and no problems occur, there are no legal requirements that make maintenance mandatory. Nevertheless, we recommend checking the system regularly and calling in a specialist if necessary to ensure long-term safety and efficiency.
Product: DUPLEX water softening system
Product: BASIC water softening system
If our fitters are not completely sure, we are happy to offer an on-site appointment. But this is the absolute exception.