Say goodbye to limescale with our best-selling water softener - Ideal for single-family homes with up to 9 people

This fully automatic, single-column water softener with electronic, water-flow-controlled valve CLACK WS1 is easily installed upstream of your existing domestic water supply. Using the proven ion exchange process, the system completely removes hardness-causing minerals and thus limescale from your tap water. When the salt reservoir is exhausted, the system regenerates itself automatically using the stored salt. An integrated safety float valve protects the salt container from overflow, and the fiberglass-reinforced pressure tank withstands pressure surges of up to 8 bar. Thanks to our sophisticated ECO-INJECT SYSTEM, the system saves up to 50% salt (salt-saving mode).

If you would like to learn more about how water softening works and its benefits, please visit our information pages on water softening .

Highlights:

• Electronically controlled volume control valve CLACK® WS1 with optimal capacity utilization through intelligent regeneration control
• Freely selectable capacity depending on your water hardness and consumption (please select)
• ECO-INJECT-SYSTEM salt saving (saves up to 50% salt with virtually the same capacity)
• Safety float valve to protect against overflow (for example, in the event of a power failure during regeneration)
• Connections: 1" threaded plastic fitting, professional quality
• Fiberglass reinforced quality pressure tank (pressure resistant up to 8 bar)
• Regeneration phase can be set to nighttime.
• Infinitely adjustable residual hardness, thanks to built-in blending device
• Built according to DIN-1988, NFS-certified heat exchanger resin
• Plug & Play - The system arrives at your home pre-programmed.
• Very easy assembly or with assembly service (please select)
• The system can pump wastewater to a height of up to 2 meters.
• The use of a backwash filter is recommended to avoid damaging the water softener.
• 2-year warranty (up to 7-year warranty with annual maintenance)

Scope of delivery:

• Ready-to-use water softening system model BASIC with control valve CLACK WS1 including power supply
• High-performance ion exchange resin DOW Marathon C (already filled into the pressure tanks)
• Safety float valve integrated into the salt container
• Detailed, illustrated operating and programming instructions

Optional (please select):

• Connection fitting with bypass function and 2 flexible hoses (70 cm length), including 3 meter wastewater hose
• Installation of the system by our factory customer service, including 1 x 25 kg of special salt for water softeners (we will gladly install further accessories, such as a water filter, for an additional charge)

  The installation fee includes the installation of a connection block, the connection to the wastewater, the commissioning of a basic water softening system, travel costs and the following materials: Two reducing nipples or transition pieces from the existing pipe system to the connection block.

  The flat rate only applies under the following conditions:
  1. There is approximately 30 cm of straight pipe (horizontal or vertical) after the water meter/water filter.
  2. In the immediate vicinity of the aforementioned line, there is a freely accessible parking space for the system (see dimensions).
  3. A freely accessible wastewater pipe is present in the same room.
  4. An electrical connection is available in the immediate vicinity of the installation site.

  Any necessary modifications and additional materials will be billed separately. Please note that our technicians are not permitted to work on your electrical installation.

  To clear up any potential uncertainties, please send us pictures of the installation site.