Zubehör für Osmoseanlagen

Subcategories (5)
  • What is demineralised water (fully desalinated water)?
  • Interesting facts about reverse osmosis technology
  • Advantages of reverse osmosis
  • Reverse osmosis: the principle of operation
  • The yield of a reverse osmosis system
Counselor Zubehör für Osmoseanlagen

Products (25)

You may also be interested in

fĂĽr den Privatgebrauch
fĂĽr Industrie und Gewerbe
Plug & Play complete systems with softening

Latest Reviews

5.00
christop********@gm**.com
Jul 25, 2022
Runs and runs and runs. :-)
5.00
Rocco S.
Feb 18, 2022
Easy to use, great system
5.00
Marieke A.
Nov 4, 2021
Very good quality.
5.00
Conny-Kurt K.
Oct 7, 2021
Gut
5.00
Marc S.
Jun 5, 2021
Certainly the right decision for a single-family household...
Certainly the right decision for a single-family household. It's easy to use and the water tastes much better...

Latest Questions

Product: GUTZZI under-sink reverse osmosis system

Answer: Precisely because the system is very compact, changing the filter is relatively uncomplicated. You turn off the water and can then place the entire system on the sink or take it outside. Only the water that is in the hoses comes out.

Product: LOWARA small pressure booster system BGM 9/A

Answer: The pump can be used for this without any problems. We would be happy to advise you on this, including regarding storage tanks etc.

Product: ZIP reverse osmosis system

Answer: The question is not easy to answer, generally the ratio is 50/50. Since you don't have to empty the water (it collects back in the container) but only fill it up with new water, you can continue to process the other 50%. Only after the 10th run should you refill the basic tank.

Product: REOS Plug & Play reverse osmosis system with softening system

Answer: Basically, you can connect the system as it is delivered to the water, wastewater and electricity and produce water directly. We also offer various accessories such as storage tanks if necessary. That depends on your requirements. We would be happy to create an individual offer.

Product: REOS Plug & Play reverse osmosis system with softening system

Answer: This depends on the respective model. Here are a few calculations (under optimal conditions): The model with an output of 150 l / h needs almost 7 hours for 1 mÂł of water with a power consumption of 0.5 kW. This corresponds to approximately 3.6 kWh per mÂł. The model with 300 l / h output therefore needs approx. 3.5 h for 1 mÂł of water with a power consumption of 0.65 kW. This corresponds to approximately 2.16 kWh per mÂł. The model with 600 l / h output, on the other hand, needs less than 2 hours for 1 mÂł of water with a power consumption of 2.2 kW. This corresponds to approximately 3.6 kW per mÂł.



Satisfied costumers

eKomi - The Feedback Company: gute Beratung, schneller Versand