Zubehör für Osmoseanlagen
Zubehör für Osmoseanlagen-
Pressure boosting systems -
Ersatzfilter & Membrane -
Storage tanks -
Assembly & maintenance -
Vorfilter-Sets
Pressure boosting systems
Ersatzfilter & Membrane
Storage tanks
Assembly & maintenance
Vorfilter-Sets
25 Products
Hier finden sie jedes Zubehör rund um die Osmoseanlage. Bei der Umkehrosmose werden alle unerwünschten, gelösten Stoffe im Wasser auf rein mechanische Wirkungsweise entfernt. Das Wasser wird durch eine semipermeable (halbdurchlässige) Membrane filtriert. Durch den entsthehenden osmotischen Effekt wird ein hochreines Trinkwasser (Permeat) gewonnen. Die gefilterten Stoffe werden hier nicht gesammelt, sondern an das Abwasser abgegeben, wodurch die Umwelt nicht belastet wird. Umkehrosmoseanlagen haben sich weltweit etabliert und schon millionenfach bewährt. Großtechnisch wird mit diesem Verfahren sogar Meerwasser entsalzt. Nur sehr wenige natürliche Quellen besitzen die Reinheit des durch die Umkehrosmose erzeugten Wassers.
You may also be interested in
für den Privatgebrauchfür Industrie und Gewerbe
Plug & Play complete systems with softening
Latest Reviews
Latest Questions
Product: GUTZZI under-sink reverse osmosis system
Answer: Precisely because the system is very compact, changing the filter is relatively uncomplicated. You turn off the water and can then place the entire system on the sink or take it outside. Only the water that is in the hoses comes out.
Product: LOWARA small pressure booster system BGM 9/A
Answer: The pump can be used for this without any problems. We would be happy to advise you on this, including regarding storage tanks etc.
Product: ZIP reverse osmosis system
Answer: The question is not easy to answer, generally the ratio is 50/50. Since you don't have to empty the water (it collects back in the container) but only fill it up with new water, you can continue to process the other 50%. Only after the 10th run should you refill the basic tank.
Product: REOS Plug & Play reverse osmosis system with softening system
Answer: Basically, you can connect the system as it is delivered to the water, wastewater and electricity and produce water directly. We also offer various accessories such as storage tanks if necessary. That depends on your requirements. We would be happy to create an individual offer.
Product: REOS Plug & Play reverse osmosis system with softening system
Answer: This depends on the respective model. Here are a few calculations (under optimal conditions): The model with an output of 150 l / h needs almost 7 hours for 1 m³ of water with a power consumption of 0.5 kW. This corresponds to approximately 3.6 kWh per m³. The model with 300 l / h output therefore needs approx. 3.5 h for 1 m³ of water with a power consumption of 0.65 kW. This corresponds to approximately 2.16 kWh per m³. The model with 600 l / h output, on the other hand, needs less than 2 hours for 1 m³ of water with a power consumption of 2.2 kW. This corresponds to approximately 3.6 kW per m³.
What is demineralised water (fully desalinated water)?
Interesting facts about reverse osmosis technology
Advantages of reverse osmosis
Reverse osmosis: the principle of operation
The yield of a reverse osmosis system