Enth√§rtungsanlagen f√ľrs Ein- und Mehrfamilienhaus

8 Products

BASIC Enthärtungsanlage
as of ‚ā¨999.00

BASIC Enthärtungsanlage


(154)
4.8
Water connection: DN25 - 1''
Nominal flow (max. flow): bis 2,7 m³/h
Number of columns: 1 (Basic)
control valve: Clack WS 1
Wasserbedarf tägl. ca.: bis 1.000 Liter
w√§hlbare Kapazit√§ten: 20 bis 60 m¬≥ x ¬įdH
  • Profi-Wasserenthärtungsanlage für Einfamilienhäuser bis zu 6 Personen
  • Frei wählbare Kapazität abhängig von Ihrer Wasserhärte und Ihrem Verbrauch für bis zu 6 Personen
  • Elektronisch-mengengesteuertes Steuerventil CLACK® WS1
  • Nie wieder Kalk - entfernt (Calcium und Magnesium) nachweisbar und zuverlässig
  • ECO-INJECT-SYSTEM Sparbesalzung (spart bis zu 50% Salz bei nahezu gleichbleibender Kapazität)

DUPLEX Enthärtungsanlage
as of ‚ā¨1,499.00

DUPLEX Enthärtungsanlage


(25)
4.8
Water connection: DN25 - 1''
Nominal flow (max. flow): bis 3,1 m³/h
Number of columns: 2 (Pendel)
control valve: Clack WS 1 TT
Wasserbedarf tägl. ca.: bis 3.000 Liter
w√§hlbare Kapazit√§ten: 20 bis 180 m¬≥ x ¬įdH

Profi-Doppel-Enthärtungsanlage für Ein- & Mehrfamilienhäuser, verschiedene Kapazitäten für jeden Verbrauch und jede Wasserhärte, 24 Stunden um die Uhr weiches Wasser durch zweite Säule, elektronisches Steuerventil Clack WS1 TT, extrem sparsam, wartungsarm, entfernt Kalk (Calcium und Magnesium) nachweisbar


BASIC Enthärtungsanlage im Sorglospaket
‚ā¨1,749.00
as of ‚ā¨1,729.00

BASIC Enthärtungsanlage im Sorglospaket


(211)
4.9
Water connection: DN25 - 1''
Nominal flow (max. flow): bis 2,7 m³/h
Number of columns: 1 (Basic)
control valve: Clack WS 1
Wasserbedarf tägl. ca.: bis 1.000 Liter
w√§hlbare Kapazit√§ten: 20 bis 60 m¬≥ x ¬įdH

Einsäulige Wasserenthärtungsanlage für kleine Haushalte und Einfamilienhäuser, verschiedene Kapazitäten für jeden Verbrauch und jede Wasserhärte, elektronisches Steuerventil CLACK WS1 (jetzt NEU), extrem sparsam, wartungsarm - INKLUSIVE Montageservice + 1 x 25 kg Salz + Anschlussteile


BASIC Enth√§rtungsanlage im Sorglospaket f√ľr Bauherren
as of ‚ā¨1,749.00

BASIC Enth√§rtungsanlage im Sorglospaket f√ľr Bauherren


(4)
5.0
Water connection: DN25 - 1''
Nominal flow (max. flow): bis 2,7 m³/h
Number of columns: 1 (Basic)
control valve: Clack WS 1
Wasserbedarf tägl. ca.: bis 1.000 Liter
w√§hlbare Kapazit√§ten: 20 bis 60 m¬≥ x ¬įdH

Einsäulige Wasserenthärtungsanlage für kleine Haushalte und Einfamilienhäuser im Komplett-Set inkl. Montage-Service, Anschluss-Set und 1x 25 kg Salz - Bauherren-Angebot gilt nur, wenn in Ihrem Haus noch keine Wasserleitungen vorhanden sind


DUPLEX Enthärtungsanlage im Sorglospaket
as of ‚ā¨2,299.00

DUPLEX Enthärtungsanlage im Sorglospaket


(43)
5.0
Water connection: DN25 - 1''
Nominal flow (max. flow): bis 3,1 m³/h
Number of columns: 2 (Pendel)
control valve: Clack WS 1 TT
Wasserbedarf tägl. ca.: bis 2.000 Liter
w√§hlbare Kapazit√§ten: 20 bis 120 m¬≥ x ¬įdH

Zweisäulige Wasserenthärtungsanlage für Ein- und Mehrfamilienhäuser, verschiedene Kapazitäten für jeden Verbrauch und jede Wasserhärte, elektronisches Steuerventil CLACK WS1 (jetzt NEU), extrem sparsam, wartungsarm, nahezu nicht erschöpfbar durch zweiten Tank - Komplett-Set inkl. Montage-Service, Anschluss-Set und 5x 25 kg Enthärtersalz


LEYCOsoft 9/15 Enthärtungsanlage Sorglospaket
as of ‚ā¨2,149.00

LEYCOsoft 9/15 Enthärtungsanlage Sorglospaket

  • DVGW-Zertifizierte-Wasserenthärtungsanlage für Einfamilienhäuser bis zu 8 Personen
  • zwei Kapazitäten für 2 bis 4 bzw 4 bis 8 Personen je nach Wasserhärte und Verbrauch
  • hochwertiges, elektronisches Steuerventil mit optionaler App-Überwachung
  • patentierte Ventiltechnologie für hohe Zuverlässigkeit
  • INKLUSIVE Montageservice + 1x 25 kg Salz + Anschlussteile

DUPLEX-PRO 1,25" Enthärtungsanlage
as of ‚ā¨2,649.00

DUPLEX-PRO 1,25" Enthärtungsanlage


(2)
5.0
Number of columns: 2 (Pendel)
Water connection: DN32 - 1,25''
Nominal flow (max. flow): bis 7,4 m³/h
control valve: Clack WS 1.25 TWIN
Wasserbedarf tägl. ca.: bis max. 15.000 Liter
w√§hlbare Kapazit√§ten: 180 bis 700 m¬≥ x ¬įdH

Zweisäulige Wasserenthärtungsanlage für den professionellen Einsatz in großen Wohnanlage oder in der Industrie mit 2 CLACK-Steuerventilen und 1,25" Anschluss, entfernt Kalk (Calcium und Magnesium) nachweisbar


DUPLEX-PRO-PLUS 1,5" Enthärtungsanlage
as of ‚ā¨6,490.00

DUPLEX-PRO-PLUS 1,5" Enthärtungsanlage

Number of columns: 2 (Pendel)
Water connection: DN40 - 1 1/2''
Nominal flow (max. flow): bis 10,5 m³/h
control valve: Clack WS 1.5 TWIN
Wasserbedarf tägl. ca.: bis 20.000 Liter
w√§hlbare Kapazit√§ten: 400 bis 1500 m¬≥ x ¬įdH

Zweisäulige Wasserenthärtungsanlage für den professionellen Einsatz in großen Wohnanlage oder in der Industrie mit 2 CLACK-Steuerventilen und 1,5" Anschluss, entfernt Kalk (Calcium und Magnesium) nachweisbar


Requirements for private use

Our systems meet all legal requirements for installation in single- and multi-family homes. The requirements vary depending on the size of the house and water consumption.

Individual systems (basic) for single-family homes

The individual systems, also known as the ‚ÄúBasic‚ÄĚ model, have a softening column that is filled with special exchanger resin. This resin removes limescale from drinking water without affecting water quality. The capacity of the exchanger resin is limited and depends on your water consumption and the water hardness to be removed. If the capacity is exhausted, the system must be regenerated with salt, similar to a dishwasher. During the regeneration phase, only hard water is available.

Double systems (duplex) for apartment buildings or single-family homes with high water consumption

Our double systems are more expensive to purchase than the basic single systems. The reason for this is that they have two softening columns. This allows for more efficient operation and a continuous supply of soft water. This is particularly useful in apartment buildings where water consumption fluctuates. But a duplex system can also be advantageous in single-family homes with high water consumption, for example due to a pool or frequent bathing.

You may also be interested in

Enth√§rtungsanlagen f√ľr Industrie und Gewerbe
Accessories for softening systems
Configurator
Water softening system test

Latest Reviews

5.00
Rolf L.
Jul 13, 2024
Service, delivery and assembly were perfect. The price was...
Service, delivery and installation were perfect. The price was extremely satisfactory. The device works perfectly. Kind regards *** *** Am leer Rain 5 *** Ge...
5.00
Guenter F.
Jul 2, 2024
So far, the product delivers exactly what we installed it for...
So far, the product has done exactly what we installed it for. We had a problem with limescale (and subsequent burnout) on our instantaneous water heater and...
5.00
Ralf H.
Jul 1, 2024
Great product at a good price
5.00
Patrick M.
Jun 28, 2024
Everything was perfect - from the order to the clarification...
Everything was perfect - from the order, to the clarification of the installation situation, assembly & commissioning, instruction and finally the qualit...
5.00
Ralf Z.
Jun 28, 2024
The facility is still quite new, but what I have noticed so far...
The system is still quite new, but what I have noticed so far is that it works. I set the system to a residual hardness of around 2-3¬įdH. This worked with th...

Do you have questions?

+497251936760
contact form
Request a quote

Product: BASIC water softening system

5 upvotes 1 answers
Answer:
0

The resin cartridges in your Basic 40 softening system generally do not need to be replaced because they regenerate themselves. The regeneration of the resin is an automated process that takes place during the cleaning cycles of the system. Here are some details:

  • Regeneration process: During regeneration, the resin is flushed with a salt solution, which dissolves and removes the accumulated calcium and magnesium ions (which are responsible for water hardness) from the resin. This ‚Äúrenews‚ÄĚ the resin and can be used effectively to soften water again.

  • Regular cleaning: This regeneration is carried out regularly, depending on the amount of water used and the hardness of the water. In a 4-person household with a water hardness of 20¬į dH, the system will regenerate more frequently to ensure efficiency.

  • No replacement necessary: As long as the system is properly maintained and the regenerating salt is topped up regularly, the resin cartridges do not need to be replaced. However, you should regularly inspect and maintain the system to ensure its longevity and optimal performance.

  • In summary, the resin cartridges in your Basic 40 system are maintained effectively by the built-in regeneration process and therefore do not require regular replacement.

    Product: DUPLEX water softening system

    2 upvotes 1 answers
    Answer:
    0
    Yes, we would be happy to offer you a suitable maintenance contract.

    Product: BASIC water softening system

    2 upvotes 1 answers
    Answer:
    0
    According to DIN, maintenance should be carried out by a specialist at least every 12 months

    Product: BASIC water softening system

    1 upvotes 1 answers
    Answer:
    0

    It is best to let the salt empty until the water is visible.
    Then refill and ideally not full to the brim so that there is not too much weight on the salt.

    If you keep filling the container without waiting until you see the water at the bottom, clumps can occur.

    Product: BASIC water softening system in a carefree package

    1 upvotes 1 answers
    Answer:
    0
    We normally work with photos of the on-site situation, which our fitters look at.
    If our fitters are not completely sure, we are happy to offer an on-site appointment. But this is the absolute exception.
    More questions and answers


    Satisfied costumers

    eKomi - The Feedback Company: gute Beratung, schneller Versand