Javascript is disabled in your browser. Please enable it to use this website.

REOS Plug & Play reverse osmosis system with softening system

Assembly service at cost

Assembly service by our in-house specialist according to effort: Travel: €100 including VAT. Flat rate (Germany) Working hours: €100 including VAT. per hour (billing in 1/4 hour increments) additional material: based on effort

Mixed bed complete demineralization cartridge 10 liters

Mixed bed resin for full demineralization (deionized water)

If a conductance of less than 10 µS is required, we recommend using a mixed bed cartridge.

ARICON storage tank LTV 115 liters for drinking water

Storage tanks as temporary storage

Ideal as a temporary storage. Please note that if you use a tank you will also need a pump to move the water out of the tank.

Pre-filter set 10" for REOS-PRO systems RO-04

Pre-filter for RO-PRO systems

We strongly recommend that you use these pre-filters before the system if they are not already installed, otherwise the membrane will wear out too quickly.

30 bags of 25 kg each of special salt for ion exchangers (1 pallet)

Salt for ion exchangers (large quantities)

You can use our online calculator to calculate your salt consumption .

RO-PRO reverse osmosis membrane 4021 for RO-04

Replacement membranes

In this reverse osmosis system, the membranes need to be replaced from time to time. The change interval depends heavily on the respective water consumption. In general, the membrane should be changed when the conductivity increases or the performance of the system decreases.

LOWARA small pressure booster system BGM 3/A

Pressure boosting systems

The product water (permeate) only leaves the reverse osmosis system with very low water pressure. To increase this, we recommend using a pressure booster system after the system.

add to wishlist ALFILTRA REOS Plug & Play reverse osmosis system with softening system

Pre-assembled reverse osmosis system with upstream water softening system for industry and large consumers, latest technology in a compact design, automatic flushing system for the best possible efficiency and optimal service life of the membranes, completely pre-assembled on an aluminum frame, PLC controller with remote administration via USB or serial via Internet, removes substances such as heavy metals, uranium, Calcium, sodium, nitrate, medical residues and microorganisms up to 99%

Ideal for water consumption of 4 to 15 m³ per day

Power (max.)

3,6 m³ / Tag (150 l / Stunde)

€8,318.10

7,2 m³ / Tag (300 l / Stunde)

€9,508.10

14,4 m³ / Tag (600 l / Stunde)

€11,293.10

€8,318.10

incl. VATexcl. shipping costs from €0.00

(1)

5.0

Delivery 4/22/24 to 4/23/24

ask a question

Description

Pre-assembled reverse osmosis system with upstream water softening system.

All system parts (except the salt container) are fully assembled on a frame. The final assembly of the system is carried out virtually via plug & play.

Very good yield of up to 75% thanks to the preceding softening.

Highlights:

Output max. at 15° C water temperature ( please select above )
Permeate performance up to 75% with water hardness 0° dH
RO membranes XLP stainless steel centrifugal pump 230V/50Hz
PLC controller
Conductivity display and flow meter

INCLUDED : Duplex TT Compact: Fully automatic, two-column water softening system. Control valve Clack WS 1TT. Freely programmable electronics with quantity control, disinfection flushing and forced regeneration. Safety float valve to protect against overflowing of the salt container. Glass fiber reinforced quality pressure tanks up to 10 bar. Eco-Inject system for optimal capacity utilization with economical salting. High performance ion exchange resin. Salt container 80 l standing separately.

Connections: feed water, product water, waste water 3/4" male electrical connection: 230 V, 50 Hz

Technical data

Model	liter per hour	Daily performance in m³	membrane	Number of membranes	Softening system	Power connection	Dimensions W x D x H
RO-04/40	160	4	4021	1	Duplex 40	230V/50Hz/630W	850x650x1008
RO-08/80	350	8th	4040	1	Duplex 80	230V/50Hz/630W	1010x650x1370
RO-15/180	600	15	4040	2	Duplex 180	400V/50Hz/2200W	1010x650x1800

Technical data softening system

Model	Capacity in m³ x ° dH	Salting	Salt consumption in kg / regeneration	Resin volume in liters	max. flow (resin)
Duplex 40	40	200g/liter resin	2.0	2x10	1.7
Duplex 80	80	200g/liter resin	4.0	2x20	2.1
Duplex 180	180	200g/liter resin	9.0	2x45	4.5

Attachments (1)

Technical data Plug and Play reverse osmosis systems (0.13 MB)

Questions and Answers (2)

Answer: Basically, you can connect the system as it is delivered to the water, wastewater and electricity and produce water directly. We also offer various accessories such as storage tanks if necessary. That depends on your requirements. We would be happy to create an individual offer.

Answer: This depends on the respective model. Here are a few calculations (under optimal conditions): The model with an output of 150 l / h needs almost 7 hours for 1 m³ of water with a power consumption of 0.5 kW. This corresponds to approximately 3.6 kWh per m³. The model with 300 l / h output therefore needs approx. 3.5 h for 1 m³ of water with a power consumption of 0.65 kW. This corresponds to approximately 2.16 kWh per m³. The model with 600 l / h output, on the other hand, needs less than 2 hours for 1 m³ of water with a power consumption of 2.2 kW. This corresponds to approximately 3.6 kW per m³.

All questions for this product Ask a question

Technical specifications

	ALFILTRA REOS Pro 150 Plug & Play	ALFILTRA REOS Pro 300 Plug & Play	ALFILTRA REOS Pro 600 Plug & Play
sku	310.4021.DU40	310.4040.DU80	310.4040.DU180
Manufacturer	FILTRASELECT	FILTRASELECT	FILTRASELECT
Guarantee	2 Jahre	2 Jahre	2 Jahre
Operating temperature (min)	5 °C	5 °C	5 °C
Water connection
Width	850 mm	1010 mm	1010 mm
depth	650 mm	650 mm	650 mm
Height	1008 mm	1370 mm	1800 mm
Operating temperature (Max)	30° C	30° C	30° C
Operating pressure (Max)
Operating pressure (min)	2,2 bar	2,2 bar	2,2 bar
Power connection	230 Volt / 50-60 Hz	230 Volt / 50-60 Hz	400 Volt / 50-60 Hz
Nominal flow (max. flow)	160 l/h	350 l/h	600 l/h
Categories	Breweries Car washes Steam boiler Plug & Play complete systems with softening Reverse osmosis systems