ALFILTRA Connection set Duplex 1'' with bypass function including intersection (75 cm hoses)

Connection set for installing a water softening system in the existing pipe network

Consisting of connection block :

• Connection block and bypass section made of brass. 2 x external thread 1", 2 x internal thread 1". Test valve
• with blending device for adjusting the residual hardness
• 3 shut-off valves for inlet, outlet and bypass
• Incl. test valve in the outlet (can be installed alternately)
• Installation length approx. 165 mm
• Inlet/outlet internal thread 1"
• Outlet external thread 1"

and 2 stainless steel coated safety flex hoses :

• 2x connecting hose with stainless steel braiding and stainless steel press sleeves
• 1 side with union nut 1"
• other side with 90° bend and union nut 1"
• Length 750mm

including water hardness test set (1x15 ml) to determine water hardness

including waste water hose (3 meters long)

Please note: Some of our systems already have a blending device (residual hardness regulator) directly on the control valve. With these systems (e.g. BASIC) you can use the connection set without blending .

Please read on here for more information on installing a water softener .